.

Showing posts with label Stadium. Show all posts
Showing posts with label Stadium. Show all posts

STADE JEAN BOUIN BY RUDY RICCIOTTI



02-Stade-Jean-Bouin-by-Rudy-Ricciotti


Since 1925, the Stade Jean Bouin has played an important role in the history of rugby as well as one of its legendary teams – the Stade Français.


02-Stade-Jean-Bouin-by-Rudy-Ricciotti


In a residential district with three of the largest sports facilities in Paris (Roland Garros, Parc des Princes and Stade Jean Bouin), the challenge faced by designer Rudy Ricciotti was to “tackle a massive architecture project while steering clear of a violent impact on the urban landscape.”


03-Stade-Jean-Bouin-by-Rudy-Ricciotti


The result is a remarkable, totally asymmetric envelope, undulating in three dimensions so that “the structure is suggested and the ultra-high performance concrete envelope contains the edifice, much like skin around a body,” says its architect.


04-Stade-Jean-Bouin-by-Rudy-Ricciotti


“The only way of creating the two curves in this sheet was using a triangular mesh,” explains Romain Ricciotti, co-founder of Lamoureux Ricciotti Ingénierie, the structural engineering firm responsible for the project.


05-Stade-Jean-Bouin-by-Rudy-Ricciotti


The 23,000 m2 envelope, including a 12,000 m2 roof, is made of 3600 self- supporting Ductal triangles, each averaging 8m to 9m long by 2.5m wide and 4.5cm thick.


06-Stade-Jean-Bouin-by-Rudy-Ricciotti


On the façade, the panels form a light and porous web, while the roof design is simplified to permit spaces in which to house protective and light-diffusing glass.


07-Stade-Jean-Bouin-by-Rudy-Ricciotti


Although this combination of glass and ultra-high performance concrete (UHPC) makes the project very original, it presented new technical challenges in order to construct a watertight envelope that would cover the stadium’s entire surface area (excluding the playing field).


08-Stade-Jean-Bouin-by-Rudy-Ricciotti


The panels, manufactured by French precaster, Bonna Sabla, at a rate of 18 per day, were delivered to the site as needed and installed in a very precise order, then attached to the beams of the metal framework, using ball-and-socket attachments able to withstand wind forces.


09-Stade-Jean-Bouin-by-Rudy-Ricciotti


Sound insulation was also the subject of careful study. The geometric characteristics of the stadium and the curve of the stands are designed to channel sound towards the spectators, ensuring a festive atmosphere inside the grounds as well as comfort for local residents.


10-Stade-Jean-Bouin-by-Rudy-Ricciotti


The architect’s work was entirely guided by respect for the urban environment. “The transparency resulting from the cellular latticework generates a dialogue between the sports complex and its environment. By casting off enclosed spaces and totally opaque walls, our proposal emphasizes social bonding and elegance,” Rudy Ricciotti declared when his bid was submitted.


13-Stade-Jean-Bouin-by-Rudy-Ricciotti11-Stade-Jean-Bouin-by-Rudy-Ricciotti12-Stade-Jean-Bouin-by-Rudy-Ricciotti

16-Stade-Jean-Bouin-by-Rudy-Ricciotti14-Stade-Jean-Bouin-by-Rudy-Ricciotti15-Stade-Jean-Bouin-by-Rudy-Ricciotti

19-Stade-Jean-Bouin-by-Rudy-Ricciotti17-Stade-Jean-Bouin-by-Rudy-Ricciotti18-Stade-Jean-Bouin-by-Rudy-Ricciotti

22-Stade-Jean-Bouin-by-Rudy-Ricciotti20-Stade-Jean-Bouin-by-Rudy-Ricciotti21-Stade-Jean-Bouin-by-Rudy-Ricciotti


Location: Avenue du Général-Sarrail, Paris, France

Architect: Rudy Ricciotti

General engineering: Berim

Framework engineering: ALT o Group/Marc Malinowsky

Structure and envelope engineering:Lamoureux Ricciotti ingénierie

Framework: Cabrol

Precaster: Bonna Sabl

Contractor: Leon Grosse

Area: 23,000 m2

Year: 2013

Client: City of Paris (heritage and Architecture Department)
via Ductal

AL WAKRAH STADIUM BY ZAHA HADID AND AECOM



01-Al-Wakrah-stadium-by-Zaha-Hadid-and-Aecom


AECOM, in association with Zaha Hadid Architects, have developed the new, innovative design in Al Wakrah, famous for its fishing and seafaring heritage, the proposed southern-most Host City for the 2022 FIFA World Cup.





Located approximately fifteen kilometres south of Doha, Al Wakrah has served as a vital commercial port and a gateway to the capital throughout Qatar’s history. Al Wakrah’s tradition is reflected in the stadium design, which captures the essence of the traditional dhow, an Arabian pearl fishing boat.


02-Al-Wakrah-stadium-by-Zaha-Hadid-and-Aecom


The design of the stadium and the development of an approx. 585,000 m2 precinct area surrounding it will embrace the cultural heritage of Al Wakrah and the adjacent historical settlement of Al Wukair.


03-Al-Wakrah-stadium-by-Zaha-Hadid-and-Aecom

The stadium will have a gross capacity of 40,000. The top-tiers of the stadium will be modular, allowing the stadium’s capacity to be lowered to 20,000.

NEW STADIUM INTER BY MANICA ARCHITECTURE



01-New-Stadium-Inter-by-Manica-Architecture


MANICA Architecture ha lavorato, in collaborazione con lo Sports Investment Group (SIG) con l'obiettivo di fornire lo studio di fattibilità e la progettazione del nuovo stadio da 60.000 posti per il Football Club Inter in Italia, nella zona tra il Parco Trenno e Settimo Milanese, non troppo distante da San Siro, come riportato dall stessa SIG.



02-New-Stadium-Inter-by-Manica-Architecture


Il progetto dello stadio fa parte di un più ampio piano di sviluppo creato da MANICA Architecture per dotare Milano di un'area definitiva destinata allo sport e all'intrattenimento. Il progetto prevede un nuovo stadio a regola d'arte da 60.000 posti, un'arena da 12.000 spettatori, spazi per l'intrattenimento, aree retail e commerciale, e il potenziale per lo sviluppo futuro di strutture per conferenze d'affari, hotel e torri residenziali.


03-New-Stadium-Inter-by-Manica-Architecture



Il progetto si figura come un'esperienza sconosciuta ai fans italiani. Ampi atri e servizi adeguati, insieme a club privati ​​eristoranti, si combinano con una vista spettacolare dello stadio in grado di creare un design di classe a livello mondiale. Ulteriori dettagli del progetto rimangono riservati, poichè è in atto la valutazione di fattibilità da parte del cliente.

BORISOV FOOTBALL STADIUM BY OFIS ARCHITECTS



01-Borisov-Football-Stadium-by-OFIS-Architects


The program takes into account the natural advantages of the location and the existing interventions in the terrain, maintaining as many of the existing trees on site as possible.


02-Borisov-Football-Stadium-by-OFIS-Architects


It also takes into account the fact that the stadium has 13.000 seats, meaning it has to obtain 4 stars according to UEFA categorization and also have an additional 3.000m2 of public space. The stadium will also require external arrangements that will provide quality traffic organization and controlled/separate access during the match and in everyday use.


03-Borisov-Football-Stadium-by-OFIS-Architects


The final aspect of the complex is to have a recognizable image of this dominant facility, placed in the soft surrounding greenery. The stadium will have its own, distinctive modern character and will be based on an environmental and user friendly approach. The arena forms a unified rounded dome which gives the impression of a single enclosed object and despite its medium size it has the impression of a large, dominant and powerful landmark.


04-Borisov-Football-Stadium-by-OFIS-Architects


Internally, the rounded arena provides good acoustics and an extroversive atmosphere during the game for both, players and fans and during training time it allows for introverted concentration on the game. The playing surface has N–S orientation, with a total area of 85x105m, 68x105m of which is designated for playing. The remaining area allows enough space for the installation of advertising screens, photographers and cameras.


05-Borisov-Football-Stadium-by-OFIS-Architects


The seats are arranged around the playing field in rows of 17 along the long sides and rows of 27-28 along the short sides. The west upper gallery is reserved for press and the east for VIP. There are 250 seats reserved for VIP. Access to this area is via an elevator directly next to the entrance area with the option of car driveway. VIP seats are designed to high standards and have the opportunity to link smaller individual units rented by companies or groups.


06-Borisov-Football-Stadium-by-OFIS-Architects


As part of the VIP stands there are two separate rooms with a bar and entertainment space for during the break. On the opposite side are the press cabins and seats with tables for 40 journalists with direct access to stairs for the press room and the mix zone. Separate access for soccer players is from the lower platform, with direct access for team buses and parking.


07-Borisov-Football-Stadium-by-OFIS-Architects


On entry point to the field there are two dressing rooms, mix zone, physiotherapy and a space for doping control. There are 4 floors with extra program and service facilities, under the west stand area, 3 floors under the east side and on the west side 2 floors. The foyer for visitors is located on the first floor level and has 4 stairway access points. It is a covered plateau, naturally ventilated and unheated area.


08-Borisov-Football-Stadium-by-OFIS-Architects


This space contains the visitors' toilets, bars (drinks and snacks), first-aid room and detention; it will be used as a place to break during half time. The space extends all around the inner stadium arena, with the toilets and bars designed as closed, isolated heated boxes. 3.000 m2 of public program is distributed on zero level on the N, S and E.


09-Borisov-Football-Stadium-by-OFIS-Architects


In the eastern part a restaurant and bowling area are located. The restaurant is used during the match as a VIP restaurant and a service elevator for catering serves, VIP lounge and the bar within the public foyer. In the southern part there are public fitness/gym studios. Other public area spaces are designed for various commercial activities.


10-Borisov-Football-Stadium-by-OFIS-Architects


All the restaurants have individual access from the public platform. Around the stadium is a rounded pedestrian square acting as a meeting area and also as a peripheral roundabout. Out of it parking pockets are organized hidden into the existing forest area. When there is no match on these areas can be used for skating, rollerblading, carting etc...


13-Borisov-Football-Stadium-by-OFIS-Architects11-Borisov-Football-Stadium-by-OFIS-Architects12-Borisov-Football-Stadium-by-OFIS-Architects

16-Borisov-Football-Stadium-by-OFIS-Architects14-Borisov-Football-Stadium-by-OFIS-Architects15-Borisov-Football-Stadium-by-OFIS-Architects


Location: Borisov, Belarus

Architect: OFIS Architects

Project Team: Rok Oman, Spela Videcnik, Konstantine Bogoslavsky, Janez Martincic, Katja Aljaz, Janja Del Linz, Andrej Gregoric, Ana Kosi, Ieva Cicenaite, Grzegorz Ostrowski, Filip Knapczyk, Sergio Silva Santos

Areas: 3.628 m2 of public program, 480 m2 offices and 2.000 m2 service program

Seats: 12.896 seats for audience

Budget: 28 mio EUR / football facilities, 35-40 mio EUR including public program and offices

Client: PC Bate and Government of Belarus

RIVERSIDE STAND EXPANSION BY KSS



01-Riverside-Stand-Expansion-by-KSS


Fulham Football Club is delighted to announce that, following a planning hearing at London Borough of Hammersmith and Fulham on Thursday 26 July 2012, the Club’s plans to redevelop the Riverside Stand at its Craven Cottage Stadium have been approved.


02-Riverside-Stand-Expansion-by-KSS


The plans include extensive refurbishment to the Riverside Stand of the Club’s historic Craven Cottage home to increase the ground’s capacity to 30,000, and enhance the matchday facilities for fans. A major benefit to the community will be the opening of the riverside walk from Putney to Hammersmith for the first time in recent history.


03-Riverside-Stand-Expansion-by-KSS


“The proposed Riverside Stand expansion will be a flagship development for Fulham FC and will increase the capacity of Craven Cottage to 30,000, improve the range and quality of offer to spectators and maintain the unique atmosphere of the ground.


04-Riverside-Stand-Expansion-by-KSS


The new facilities will take advantage of the excellent river views, and the architectural solution is appropriate to the prominent river location, responds to the sensitive site context and minimizes encroachment into the Thames foreshore” says the KSS architects.


05-Riverside-Stand-Expansion-by-KSS


Key Design Objectives:

  • Seating capacity expanded to 30,000 without seat loss during construction;
  • The design of the new stand should mirror the bend in the river;
  • New stand should reduce the impact of the floodlighting on the river and adjacent streets;
  • The new stand should be sympathetic in scale to the trees to the south;
  • The overall scale of the new stand should reflect the scale of the adjoining stands to the north and south;
  • The new stand should take advantage of its riverside location and the longer views over the river to the west;
  • The new stand should provide a new public River walk with public toilets, cafes and restaurant;
  • External materials and colour to reflect riverside setting and its orientation;
  • New stand to provide facilities for community and other uses on non-matchday.

06-Riverside-Stand-Expansion-by-KSS


Like all modern buildings, the stand will be highly environmentally sustainable. The entire lower tier will be retained (and used during the building works), whilst a central gutter beneath the main roof trust will allow the collection of rainwater into two tanks, which then can be used for pitch irrigation.


07-Riverside-Stand-Expansion-by-KSS


Although Fulham haven't confirmed any of the following sustainable plans, they have been "recommended for further consideration", so they could well be seen: they include the provision of wind turbines on the stand's roof, and the implementation of two solar panels on either side of the roof. Perhaps more of a novelty, the environmental plan also "recommended" a ground source heat pump.


08-Riverside-Stand-Expansion-by-KSS


The materials to build the new stand will be arriving by barge, naturally, on a specially constructed platform to minimise noise and traffic in the surrounding roads. All the new fixtures and fittings will be low-energy and sustainable, and up to the standards of 100's of different standard guides, and so it is pleasing to see that the stand could become, in theory, partly self-running. A start date is yet to be set for construction but Fulham will continue to play at Craven Cottage while work is carried out.


11-Riverside-Stand-Expansion-by-KSS09-Riverside-Stand-Expansion-by-KSS10-Riverside-Stand-Expansion-by-KSS

14-Riverside-Stand-Expansion-by-KSS12-Riverside-Stand-Expansion-by-KSS13-Riverside-Stand-Expansion-by-KSS


Location: London, UK

Architects: KSS group

Project: 2012
Client: Fulham FC